This seminar is designed for ATS 5000, ATS 5004 (4 channel) scope, ATS 500XM users who have completed Comprehensive Scope Training - Level 1 (ATS1-1) seminar.
It is a top up with all the latest tricks and treats, and is continuously evolving.
This descriptor shows a few samples of what we have in the seminar, but the content is certainly not limited to this descriptor. Eventhough we deal with
lots of automotive technology, the focus is on the equipment, and how to get the best out of your scope and the latest version ATIS and Multichannel software.
This course covers:
Auto arranging axis on the screen.
Making traces visible/invisible without loosing the measured signal.
Comparing patterns on different screens.
Data collector and scope screen in one view.
Horizontal and vertical cursors (and the measurements).
Value window manipulation.
The ins and outs of Pulse count for diagnostics.
Slope measurements in the screen for energy delivery and compression measurement.
Pulse triggering (trigger scope on crankshaft reference point)
How to use, access and manipulate Measurement templates
How to save and load "objects" to speed up the use of I/O's.
Signal generator, capturing part of a pattern and play it back.
Signal generator speed and amplitude modification of replay file.
Scope trigger settings and modes
This 1 day seminar is for users who have used the ATS scope extensively and have plenty of hands on experience with the scope.
The level is high, an 40 Page AECS written manual is part of the package.
After Dakin from Dakin Auto Services attended the ATS12 training seminar in Hamilton (1-Jul-16). Dakin wrote as comment in the evaluation form that as most value to him was: "Signal generation."