The VTEQ equipment testlane can be bought as separate modules.
The sideslip tester (A) can be bought as one unit in conjunction with the computer cabinet if only a side slip meter is required.
The suspension tester (B) in conjunction with the cabinet (computer controlled electronics) can be bought as a stand alone unit.
In some case is just a brake roller tester (C) required, in conjunction with a cabinet. This enables the owner to expand at a later point to a suspension tester and / or side slip tester.
The 'floor' units can be placed in any order in a testlane configuration.
Analogue
The exact same brake tester floor unit can also be bought with an analogue cabinet, as pictured below.
12KN analogue 4WD
Brake tester with large dual scale brake force / weight indicators and in the middle brake balance / efficiency indicator.
4WD control panel
The analogue brake tester can not be equipped with a side slip tester, suspension tester, beam setter or emission tester.
12 KN (6000kg's) and 6 KN (4000kg's) maximum Brake force units available.
Digital
The advantages of a 'Digital' machine are:
Clear display prompting you what to do.
A standard supplied colour printer for producing customer reports.
Modular, but expandable to a full testlane
Diagnostic data about the vehicle's safety system increasing sales of wheel alignments, suspension parts and brake work.
The electronics can be operated with a standard supplied IR remote control in manual test mode.
