home


    Back One Page

    Next Chapter

    Back to Chapters

    Back to DIX page

    Back to Products

    Back to 'Welcome'


    03) Hook Up
      03.1) RPM pickup with Dispeed probe
      03.2) RPM pickup with trigger clamp
      03.3) RPM pickup through OBD connector
      03.4) Engine temperature sensing
      03.5) EOBD temperature sensing





    3.2) RPM pickup with trigger clamp

    Firstly you need to check if the the pick up lead is connected to the tester's (DiLink 480) designated port.

    AVL Dilink 480AVL DiLink 480


    Connect the inductive pick up to the engine,it can be connected to an ignition HT lead, or to a coil primary wire while the small earth clamp is connected to ground.

    Inductive Trigger clamp connected to Ignition primary wire for rpm pickup.Connected to Ignition Primary


    All you have to do is identify the type of coil and amount of pulses (sparks) it produces per engine revolution.
    You will be able to see the RPM in the screen when the engine is running for confirmation.

    Rpm Indication and selection page. Rpm pickup selection page


    Continued